Bidet spray fitted, concealed valve

Job Area: Greenwich (SE10)

A handheld bidet spray in a wall bracket beside a concealed single lever mixer valve on a pale wall, a hose looping down between the spray and a round wall outlet below.
The concealed valve, the spray in its bracket, the outlet below.

A new bidet spray on a wall bracket, fed by a concealed mixer valve so the water comes out warm. What a bidet spray installation involves, and how it is used.

A new bidet spray, fed by a concealed valve in the wall.

What is a bidet spray?

A small handheld spray on a hose, kept in a bracket on the wall by the toilet and used in place of a bidet. It is also called a bidet shower, a douche kit or a shattaf. A trigger on the head lets the water out, and a valve on the wall turns the supply on and off.

The photograph is the wall itself. The valve’s single lever sits on a dark chrome plate, with a red dot and a blue dot for hot and cold. To its right the handheld spray sits in its wall bracket, and below the valve a round outlet takes the hose, which loops down out of the frame and back up to the spray.

How a bidet spray works

A bidet spray, also called a bidet shower, a douche kit or a shattaf, is a handheld spray head on a flexible hose, kept in a bracket on the wall by the toilet. Squeezing the trigger on the head lets the water out, and letting go stops it. On a cold-only kit the supply comes off a small valve on the cold pipe, and the water comes out as cold as the mains. On this one the supply comes through a concealed mixer valve, which takes the hot and the cold behind the wall and lets the lever set the mix, so the spray runs warm. The valve body is buried in the wall with only its plate and lever showing, which is why the job is easiest during a refit, before the wall is tiled. The outlet under the valve is where the hose connects, and the hose is long enough to reach the bowl without pulling on the bracket. Once it is in, the valve is turned on, the trigger is tried, and every joint is checked for weeping.

That is a bidet spray installation, and a douche kit or a toilet bidet spray is the same job.

The valve on the wall

The lever turns the water on and sets the temperature.

The trigger on the head only holds the water back, so the valve is turned off after use and the hose is not left under the pressure of the mains all day.

The finish

The valve plate, the outlet, the hose and the spray here are all the same dark chrome, so they read as one set on the pale wall.

The job

A new bidet spray with a warm supply is mostly the valve, and the valve is mostly the wall it goes into.

We wrote up a concealed shower valve replacement and a traditional shower valve over a bath before, and our bathroom fitting page covers the rest of the room.

Ring 07546 185778 and say where the toilet sits and which pipes run near it, and send a photograph if you can.

Common questions

Why a concealed valve?

A mixer valve in the wall takes hot and cold, so the spray runs warm and the lever sets the temperature. A spray on cold alone only needs a small stop valve.

Should the valve be turned off after use?

Yes. The trigger holds the water back, and turning the valve off takes the pressure off the hose and the trigger when the spray is not in use.

What is the outlet under the valve?

The wall outlet the hose connects to. The valve feeds it, and the hose loops down and back up to the spray head in its bracket.

Can a bidet spray go into an existing bathroom?

Usually. A cold-only spray needs one supply near the toilet. A warm spray with a concealed valve needs hot and cold in the wall, so some tiles come up where the valve goes, unless it goes in during a refit.

Bidet spray or bidet seat?

A spray hangs on the wall and is used by hand. A bidet seat replaces the toilet seat and has its own wash nozzle, often with a power supply. They are different jobs.

Does a bidet spray drip?

A spray left under pressure can weep at the trigger once its seal wears. Shutting the valve after use takes the pressure off, and a worn head can be changed by itself.

A written quote for your job

A clear written quote before any work starts.

Please add your name.
Please add a phone number so we can ring you back.
Please add your postcode so we know where you are.
Please choose what you need.
Or message us on WhatsApp

We'll ring you back to arrange it.

The number to ring

Describe the job on the phone and you will get a straight answer about it, then a price in writing before anything starts.

Call any time, day or night

07546 185778
Call now · 24hr