A new pull out kitchen tap at the sink, with a separate filter tap beside it.
What is a pull out kitchen tap?
A kitchen tap whose spray head comes off on a hose, so it can be pulled down into the sink or out to rinse a pan or the sink. On a spring tap like this one the hose runs through a coiled spring that holds its shape, and the head docks back on an arm when it is let go.
The photograph is the tap on the worktop by the window. A coiled steel spring carries the black hose up and over in an arch, the spray head docks on the end of a short arm, and the single lever sits low on the right of the body. To the left is the small filter tap with its own lever.
Pull out and pull down
A pull out kitchen tap is a mixer with its spray head on a hose, so the water goes where it is needed instead of only where the spout points. On a spring tap like this one the hose runs up through a coiled spring, which holds the arch, lets the head come down into the sink and draws it back up again. The head sits in a holder on the side arm when it is not in use. One lever does both hot and cold, and the button on the head changes the water between a steady stream and a spray, which is the part people use most for rinsing pans and washing the sink down. Swapping an old kitchen tap for one of these is the same job underneath as any tap replacement. The supply is shut off at the isolating valves, the old tap comes off its tails and out of the hole, the new one goes in with its own tails, and everything is tightened and checked for drips with the water back on. The difference is up top, where a spring tap needs height above the sink and room for the head to move.
That is a pull out kitchen tap, and a pull down kitchen tap or a spring kitchen tap is the same idea.
The filter tap
The small tap to the left is a filter tap.
It runs drinking water through a filter under the sink, so it has its own lever and its own spout, and the main tap carries on as normal.
Tap and sink together
A tap like this suits a deep sink, where a fixed spout leaves corners that are hard to rinse.
A shallow sink under a high spring neck splashes. The height of the tap and the depth of the sink go together.
The job
A new kitchen tap is a short job when the valves under the sink turn, and a longer one when they do not.
We wrote up a mixer tap cartridge replacement and a flexi pipe leaking under the sink before, and our drainage and pipework page covers the pipes underneath.
Ring 07546 185778 and say which tap you have now, and send a photograph of it if you can.





