A new LED bathroom mirror, lit, on a tiled wall.
What is an LED bathroom mirror?
A bathroom mirror with LED strips built in behind the glass, so the light comes through a frosted band round its edge. It is wired in and switched with touch buttons on the glass, and many have a heated pad behind that keeps the middle clear of steam.
The photograph shows it switched on. It is a wide mirror with rounded corners and a thin black frame, and a band of white light glows all round the edge of the glass. Two small touch buttons sit low on the right. In the glass is the shower enclosure across the room and a frosted window.
Light round the edge
An LED bathroom mirror has its lights inside, behind the glass, so the light comes through a frosted band round the edge and falls evenly on a face in front of it. There is no separate light above it to cast shadows down, and nothing sticking off the wall. It runs off a supply brought to the wall behind it, which is why the wall is the first thing looked at: where the supply comes in, what else runs behind the tiles, and how close the mirror sits to the bath or shower, because a bathroom has zones round both that decide what kind of fitting can go where. The mirror then hangs on its bracket, screwed through the tile into plugs, with the connection made behind it before it goes up. Once it is on, the buttons are tried, the light is checked all the way round the band, and the demister, if it has one, is left on long enough to feel the glass warm. A mirror like this is heavy for its thickness, so the fixings matter as much as the wiring.
That is an LED bathroom mirror, and a bathroom mirror with lights or an illuminated bathroom mirror is the same thing.
The touch buttons
The two buttons on the glass switch the mirror.
They sit low and to one side, where a hand finds them without covering the face in the mirror. Both glow faintly, so they can be found with the main light off.
On the tiles
The wall here is large marble effect tiles, and the mirror sits flat on them, its black frame against the grey veins.
The job
A new LED mirror is part fitting and part electrics, and both halves have to be right for it to hang straight and light evenly.
We wrote up a fuse board replacement and a toilet roll holder fitted to tiles before, and our electrical services page covers the rest of the wiring.
Ring 07546 185778 and say what is on the wall now, and send a photograph of it if you can.





